Non-standard Customization Deep Hole Bracket Air Blowing Screw Feeder
Item No :
non-standard Customization Deep Hole Bracket Air Blowing Screw Feeder Handheld Automatic Locking Screwdriver Machine, Handheld Automatic Screw Locking Machine, Pneumatic Feeding System Automatic Handheld Screw Locking Machine, Screw Feeder Machine
1. Improve Production Efficiency, Reduce Labor And Save Cost
2. Do Not Take The Screw By Hand, And The Screw Will Automatically Feed To The Tap.
3. With One-hand Assembly, The Piezoelectric Screwdriver Can Be Easily Lowered To Complete The Locking Screw.
4. The Efficiency Is As High As 70 / Min.
5. The Screw Will Not Be Polluted Again.
6. Reduce The Labor Intensity Of Workers.
7. It Can Be Used For Building Calculations, Alarms, And Optional Configuration.
Screw And Screw Products Must Meet Certain Condition-Ratio Of Screw Head D To Screw Thread Length L: L "d * 1.2 (the Length Of The Screw Rod Is Greater Than 1.2 Times The Diameter Of The Screw Cap). Unit: Mm.
non-standard customization deep hole bracket air blowing screw feeder Handheld automatic locking screwdriver machine, Handheld Automatic Screw Locking Machine, Pneumatic Feeding System Automatic Handheld Screw Locking Machine, Screw Feeder Machine
1. Improve production efficiency, reduce labor and save cost
2. Do not take the screw by hand, and the screw will automatically feed to the tap.
3. With one-hand assembly, the piezoelectric screwdriver can be easily lowered to complete the locking screw.
4. The efficiency is as high as 70 / min.
5. The screw will not be polluted again.
6. Reduce the labor intensity of workers.
7. It can be used for building calculations, alarms, and optional configuration.
Screw and screw products must meet certain condition-Ratio of screw head d to screw thread length L: l "d * 1.2 (the length of the screw rod is greater than 1.2 times the diameter of the screw cap). Unit: mm.
Electric screwdriver data:
Rotational speed 0-1800
Applicable screws M1.0-M6.0
Applicable screw length 2.7-25mm
Applicable nut diameter 1.0-12mm
No limit on screws materials and types. But the total length of the screw must be more than 1.2 times the nut diameter.